Tool And Software Requirements - Compaq Presario,Presario 18XL191 User Manual

Tool and Software Requirements

The following items are required to service the Notebook:
Torx T-8 screwdriver
•
5mm nut drivers (for screwlocks and standoffs)
•
Small standard screwdriver
•
Small Phillips screwdriver
•
Diagnostics software
•
Screws
The screws used in the Notebook are not interchangeable. If an incorrect screw is used
during the reassembly process, it can damage the unit. Compaq strongly recommends that
all screws removed during disassembly be kept with the part that was removed, then
returned to their proper locations.f
Connectors and Plastic Parts
Plastic parts can be damaged by the use of excessive force during disassembly and
reassembly. When handling plastic parts, use care. Apply pressure only at the points
designated in the instructions.
2 R R
EMOVAL AND EPLACEMENT
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
P N M
RESARIO OTEBOOK AINTENANCE AND
S G 1800 S
ERVICE UIDE ERIES