Removing the Processor
To remove the processor, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest cover with TouchPad
3. Remove the keyboard
4. Remove the Heatspreader
5. If the processor matches the one shown below, proceed with step a below. If the
processor does not match the one shown, skip step a and proceed with step b on the
next page.
a. Place tip of standard screwdriver in center slot, twist screwdriver toward "Free"
until is snaps, and lift processor from the chassis.
Continued on the next page.
28 R
R
EMOVAL AND
EPLACEMENT
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
(pg
17).
(pg
23).
(pg
11).
(pg
14).
P
N
M
RESARIO
OTEBOOK
AINTENANCE AND
S
G
1800 S
ERVICE
UIDE
ERIES