Removing The Keyboard - Compaq Presario,Presario 18XL191 User Manual

Removing the Keyboard

To remove the keyboard, complete the following steps:
1. Prepare the Notebook for disassembly
2. Remove the Palmrest cover with TouchPad
1
3. Gently lift up the front of the keyboard and disconnect
ZIF Connector
To replace the keyboard, reverse these procedures.
Note: When replacing the keyboard, the
ZIF Connector rather than underneath the keyboard.
P N M
RESARIO OTEBOOK AINTENANCE AND
Presario 1800 Series
Models: XL180, XL181, XL182, XL183, XL185,
and XL190, XL191, XL192
on the system board and remove the keyboard.
S G 1800 S
ERVICE UIDE
(pg 11).
(pg 14).
Keyboard Ribbon Cable
ERIES
2
the flex cable from the
should fold behind the
R R
EMOVAL AND EPLACEMENT
17