Compaq.com - Compaq Presario 1200 Series Maintenance and Service Guide - Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
COMPAQ
Models: 1255, 1256, 1260, 1262, 1266, 1267, 1272, 1273, 1274, and 1275
|
Home Page
Illustrated Parts Catalog
Listed below are some of the considerations that you should keep in mind during the disassembly and re-
assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
Compaq screwdriver kit (Spare Part No. 161946-001)
Torx T-9 screwdriver
3/16-inch and 5mm nut drivers (for screwlocks and standoffs)
Small, standard screwdriver
Small, Phillips screwdriver
Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process
it can damage the unit.
Compaq strongly recommends that each screw removed during disassembly be kept with the part from which it was
removed, then returned to the original location.
As each subassembly is removed from the computer, it should be placed away from the work
IMPORTANT:
area to prevent damage.
Return to Removal & Replacement Procedures
1.800.AT.COMPAQ
privacy and legal statement
file:///C|/SERVICE%20MANUALS/COMPAQ%20_%20checked%...%201272,%201273,%201274,%20and%201275/service.html6/28/2004 9:23:34 AM
STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US |
SEARCH
Maintenance & Service Guide
Presario 1200 Series
|
Notice
|
Preface
|
Product Description
|
Removal & Replacement Procedures
Pin Assignments
|
Battery Pack Operations
Service Considerations
United States
|
Troubleshooting
|
Specifications
June 28, 2004