6.4 Hard Drive
Hard Drive Spare Part Number Information
5400-rpm, 60-GB
5400-rpm, 40-GB
1. Prepare the computer for disassembly (refer to
2. Position the computer with the front toward you.
3. Loosen the two Phillips PM2.0×4.0 screws 1 that secure the
hard drive cover to the computer.
4. Lift the right side of the hard drive cover 2 and swing it up
and to the left.
5. Remove the hard drive cover.
✎
The hard drive cover is included in the Miscellaneous
Plastics Kit, spare part number 378236-001.
Removing the Hard Drive Cover
Maintenance and Service Guide
Removal and Replacement Procedures
408728-001
408727-001
Section
6.3).
6–7