Sharp PN-L703WA Operation Manual page 27

5. BRIGHT +/- (Backlight adjustment)
Pressing or displays the BRIGHT menu when the
menu screen is not displayed.
B R I G H T
Press or to adjust the brightness.
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
6. ENTER
Confirms the setting.
7. RETURN
Returns to the previous screen.
8. SIZE (Screen size selection)
The menu is displayed.
Press or to select the screen size. (See page 28.)
9. DISPLAY
Displays monitor information.
INFORMATION1
LAN
INPUT MODE
SIZE
COLOR MODE
BRIGHT
VOLUME
MODEL
S/N
STATUS
TOUCH PANEL
LAN
1 9 2 0 x 1 0 8 0 V: 60 Hz
INFORMATION2
RS-232C/LAN SELECT
DHCP CLIENT
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
MONITOR NAME
DATA PORT
MAC ADDRESS
LAN
1 9 2 0 x 1 0 8 0 V: 60 Hz
The display changes from INFORMATION1 →
INFORMATION2 → clear display, and so on every time you
press this button.
• The display disappears automatically after about 15
seconds.
• is displayed during LAN communication.
LAN
• If is displayed in red, there is a duplicate IP address.
LAN
15
01/01/2016 FRI 12:00:00 AM
: D-SUB1 [RGB]
: WIDE
: STD
: 31
: 15
: PN-L703W
[X.X.X.X/X.X.X.X]
: XXXXXXXX
: 0000-000000-00-0000
: OK
H: 67.5 kHz
01/01/2016 FRI 12:00:00 AM
: LAN
: OFF
: 192.168.150. 2
: 255.255.255. 0
: 0. 0. 0. 0
: PN-L703W
: 10008
: XX-XX-XX-XX-XX-XX
H: 67.5 kHz
10. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
• sRGB applies to PC input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
Basic Operation
27
E