Touch Pen Actions; Adding Touch Pens (Pairing) - Sharp PN-L703WA Operation Manual

Touch pen actions

Only use touch pens that are used with this monitor (supplied
touch pens or optional PN-ZL02A).
Function button 1
Pen tip
LED
The factory default settings for the function buttons are as
follows.
• Function button 1 : Pen Software Link
• Function button 2 : PageDown
• Function button 3 : PageUp
You can change the functions that are assigned to the function
buttons. For details, see the Touch pen Management Tool
Operation Manual.
Using as a digitizer pen
A touch pen can be used as a Windows digitizer pen.
To use a touch pen as a digitizer pen, change the "Touch
Operation Mode Setting" to "Pen digitizer Mode" in the
Touch pen Management Tool. For details, see the Touch pen
Management Tool Operation Manual.
TIPS
• When the function button is pressed, the LED illuminates.
If the LED does not illuminate, check if the battery is depleted.
• If the LED blinks orange, the battery is low.
• If not connected to the touch pen adapter, the LED will blink
light blue.
• Use function buttons near the front of the screen. If too far
away, operation will not be possible.
• Press function buttons slowly and firmly. If pressed too
quickly, the action may not be recognized.
• The line may break if the touch pen battery is low or there
is other wireless equipment in operation nearby.
• If the pen tip becomes worn or damaged, replace it.
nTouch pen settings
Touch pen settings are configured using the Touch pen
Management Tool. For details on the settings and how to use
the utility, see the Touch pen Management Tool Operation
Manual.
TIPS
• When using the Wireless controller, you do not need to set
the touch pen. The setting of Touch pen Management Tool
is also unnecessary.
Function button 3
Function button 2
Touch Panel / Touch Pen Preparations

Adding touch pens (pairing)

• Up to 4 touch pens can be used simultaneously. (Up to
8 touch pens can be registered.) When touch pens are
added, they can be used to write simultaneously, and a
different color can be set for each pen.
Item Model
Touch pen PN-ZL02A
• To use an optional touch pen with the monitor, the touch
pen must be registered in the touch pen adapter. (pairing)
• Use the Touch pen Management Tool to perform touch pen
pairing. For details, see the Touch pen Management Tool
Operation Manual.
• Perform touch pen pairing for one pen at a time.
TIPS
• When multiple touch pens are used, touch positions and
touch pen information (color, thickness, etc.) may become
interchanged, and lines may break.
- When touched simultaneously
- When touch pens are moved near each other
- When batteries are low
- When other wireless equipment is operating nearby
• Do not press the pen tip on other than the screen.
This may cause malfunctioning.
• One touch pen cannot be registered in multiple touch pen
adapters.
• You can affix the supplied ID labels to the PN-ZL02A to
distinguish the touch pens.
Remarks
Additional touch pen
21
E