Configuring A Pc Card; Inserting A Pc Card - HP 2000-210 Reference Manual

Configuring a PC Card

To reduce the risk of loss of support for other PC Cards during configuration, install only the software
required for the device. If you are instructed by the PC Card manufacturer to install device drivers:
●
Install only the device drivers for your operating system.
●
Do not install other software, such as card services, socket services, or enablers, supplied by
the PC Card manufacturer.

Inserting a PC Card

CAUTION:
ExpressCard into a PC Card slot.
CAUTION:
Use minimal force when inserting a PC Card.
Do not move or transport the computer when a PC Card is in use.
The PC Card slot may contain a protective insert. The insert must be removed before you can insert a
PC Card:
1. Press the PC Card eject button (1).
This action extends the button into position for releasing the insert.
2. Press the PC Card eject button again to release the insert.
3. Pull the insert out of the slot (2).
To insert a PC Card:
1. Hold the card label-side up, with the connectors facing the computer.
To prevent damage to the computer and external media cards, do not insert an
To reduce the risk of damage to the connectors:
Using PC Cards (select models only) 33