Using Hp Protectsmart Hard Drive Protection In Windows 7 (Select Models Only); Identifying Hp Protectsmart Hard Drive Protection Status; Managing Power With A Parked Hard Drive - HP 2000-210 Reference Manual

Using HP ProtectSmart Hard Drive Protection in Windows 7 (select
models only)
HP ProtectSmart Hard Drive Protection protects a hard drive by parking the drive and halting data
requests under either of the following conditions:
●
You drop the computer.
●
You move the computer with the display closed while the computer is running on battery power.
A short time after the end of one of these events, HP ProtectSmart Hard Drive Protection returns the
hard drive to normal operation.
NOTE: Because solid-state drives (SSD) lack moving parts, HP ProtectSmart Hard Drive Protection
is unnecessary.
NOTE: Hard drives in the primary hard drive bay or in the secondary hard drive bay are protected
by HP ProtectSmart Hard Drive Protection. Hard drives connected to USB ports are not covered by
HP ProtectSmart Hard Drive Protection.
For more information, refer to the HP ProtectSmart Hard Drive Protection software Help.

Identifying HP ProtectSmart Hard Drive Protection status

The drive light on the computer changes color to show that a drive in the primary hard drive bay or a
drive in the secondary hard drive bay (select models only) is parked. To determine whether drives are
currently protected or whether a drive is parked, select Start > Control Panel > Hardware and
Sound > Windows Mobility Center:
●
If HP ProtectSmart Hard Drive Protection is enabled, a green check mark is superimposed over
the hard drive icon.
●
If HP ProtectSmart Hard Drive Protection is disabled, a red X is superimposed over the hard
drive icon.
●
If the drives are parked, a yellow moon is superimposed over the hard drive icon.
The icon in the Mobility Center may not show the most up-to-date status for the drive. For immediate
updates after a change in status, you need to enable the notification area icon.
To enable the notification area icon:
1. Select Start > Control Panel > Hardware and Sound > HP ProtectSmart Hard Drive
Protection.
NOTE:
2. On the Icon in System Tray row, click Show.
3. Click OK.

Managing power with a parked hard drive

If HP ProtectSmart Hard Drive Protection has parked the drive, the computer behaves in the following
ways:
●
The computer will not shut down.
●
The computer will not initiate Sleep or Hibernation, except as described in the following Note.
46 Chapter 6 Drives
If prompted by User Account Control, click Yes.