Hitachi P1-00250HFEF Basic Manual page 55

Chapter 4
4.1.5 Copying data
Data can be stored in the keypad and then copied to
other inverter unit. It is strongly recommended to backup
the data just in case.
Refer to user's guide for a more detailed explanation.
① Select R/W from menu
STOP
Menu
01 Scroll mode
02 Read / Write
03 System setting
Home oFW
②."Read" function is used for storing the data from the
inverter to the keypad.
②' 2-2. "Write" function is used for copying the data
stored in the keypad to the inverter
(Sequential writing function is used for copying the
data one after another)
STOP
Read / Write
01 READ
02 WRITE
Back oFW
For more information, refer to the user's guide.
M1 M01
46.49
Option
M1
R01
46.49
----
For parameter configuration
4.1.6 Automatic functions of the keypad
With the system configuration, you can set and adjust
keypad related parameters.
STOP
Menu
01 Scroll mode
02 Read/Write
03 System setting
Home oFW
・Available actions in the system configuration
Name
Language selection
Date function *1)
Read lock
R/W write mode
Home automatic
transition timer
Initial home screen
selection
Brightness
Auto backlight-off
function *2)
Blinking at trip
Background color
Basic information monitor
Keypad mode
Keypad version
Keypad initialization
Self-diagnostic mode
*1) Battery is required to use date function.
Recommend: Hitachi Maxwell CR2032, 3V
The battery is to be replacing every two years while the
inverter is power off.
*2) The auto backlight-off function will deactivate during
in trip status until trip reset. For more information, refer
to the user's guide.
4-7
M1
M01
46.49
----
Memo
Change the language.
Time setting, display format, and
the settings for the battery
warning.
Limits the reading property of the
data.
Change the R/W data
parameters.
Sets the time for the automatic
home screen return function.
Sets which screen is displayed at
the home screen when turns-on.
Adjust the brightness of the
keypad.
Set the turn-off time and
brightness.
Sets the screen blinking when
trips.
Set the background color.
Check the software information.
Use this setting when connecting
to older models.
Display the keypad version.
Initialize the keypad
Will be executed Self-diagnostic
mode.