Memory Module - HP Compaq 6520s Maintenance And Service Manual

Memory module

Description
2048-MB (PC2-5300, 667-MHz, DDR2)
1024-MB (PC2-5300, 667-MHz, DDR2)
512-MB (PC2-5300, 667-MHz, DDR2)
Before removing the memory module, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
3.
then unplugging the AC adapter from the computer.
Remove the battery (see
4.
Remove the memory module:
Loosen the Phillips PM2.0×5.0 captive screw (1) that secures the memory module compartment cover
1.
to the computer.
Lift the front edge of the cover (2), swing it up and back, and remove the cover. The memory module
2.
compartment cover is included in the Plastics Kit, spare part number 456614-001.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
3.
(The edge of the module opposite the slot rises away from the computer.)
40 Chapter 4 Removal and replacement procedures
Battery on page 34).
Spare part number
417506-001
414046-001
414045-001