Manual Logon; Administrator Logon; Setting Passwords In Computer Setup; Using A Setup Password - HP Compaq 2533t Administrator's Reference Manual

Manual logon

If the automatic logon is disabled by the network administrator, log on as follows:
1. In the Log On to Windows dialog box, type your information in the User Name and Password
boxes.
●
For a user, the initial user name and password are both User.
●
For an administrator, the initial user name and password are both Administrator.
2. Click OK.
Note the following considerations:
●
To prevent unauthorized access to your information, change your password as soon as possible
after setup.
● Passwords are case sensitive, but user names are not.

Administrator logon

To access the administrator logon screen in either automatic or manual logon mode:
1. Hold down the left
2. Click Shut Down, and then click Log Off.
The Administrator logon screen is displayed.
You can use the HP Windows Logon Configuration Manager to permanently modify the default logon
user.

Setting passwords in Computer Setup

Computer Setup passwords
Setup password
Power-on password

Using a setup password

The Computer Setup setup password protects the configuration settings and system identification
information in Computer Setup. After this password is set, it must be entered to access Computer Setup
and to make changes using Computer Setup.
Note the following characteristics of the setup password:
●
It is not interchangeable with a Windows administrator password, although both passwords can be
identical.
●
It is masked as it is set, entered, changed, or deleted.
62 Chapter 10 Security
Shift key, and then click Start.
Function
Protects access to Computer Setup.
Protects access to the computer contents when the computer
turns on or restarts.