HP Compaq 2533t Administrator's Reference Manual page 82

Mobile thin client

Hide thumbs Also See for Compaq 2533t:

Table of Contents

Insert the card into the PC Card slot, and then push in on the card until it is firmly seated.

NOTE:

An inserted PC Card uses power even when idle. To conserve power, stop or remove a PC

Card when it is not in use.

To remove a PC Card, follow these steps:

Close all programs and complete all activities that are associated with the PC Card.

NOTE:

Release and remove the PC Card:

Press the PC Card eject button (1).

This action extends the button into position for releasing the PC Card.

Press the PC Card eject button again to release the PC Card.

Pull the PC Card (2) out of the slot.

Chapter 11 Hardware upgrades

To stop a data transfer, click Cancel in the operating system Copying window.

Table of Contents