Compaq Armada V300 Series Reference Manual page 69

Set computer to initiate
Hibernation rather than
Suspend.
In Windows 95, turn off power
to an optional PC Card modem
Change location of Hibernation
file.
Enable/Disable Hibernation.
In Windows NT 4.0, create a
general level of power use that
applies whenever the computer
is running on external AC or DC
power. You can enter settings
for
Screen save timeout.
Hard drive timeout.
Energy-saving monitor
timeout.
Select Power (or Compaq Power)Æ
Hibernation tab, then select Standby
in the Timeout drop-down list.
Select Power (or Compaq Power)Æ
PC-Card Modems tab, then select
Turn Off Power to PC Card Modem
when not in use check box.
Select Power (or Compaq Power)Æ
Hibernation tab, then select the new
location from the Drive for Hibernation
File drop-down list.
Select Power (or Compaq Power)Æ
Hibernation tab, then select the On or
Off button.
If the computer reaches a
critical low-battery condition while
Hibernation is turned off, unsaved
work can be lost.
1. Select Compaq
PowerÆAC Energy Saver tab.
2. Select the AC Energy Saver On
radio button.
3. To set a screen save timeout,
select a timeout in the Screen
Save drop-down list.
4. To set a hard drive timeout, select
a timeout in the Hard Disk Idle
drop-down list.
5. To enable an external monitor to
enter a low-power mode following
a screen save timeout, select the
Energy Save Monitor check box.
You will not be logged off a
network when the monitor enters
low-power mode.