Compaq Armada V300 Series Reference Manual page 136

When you access Compaq Diagnostics for Windows, a scan of
all system components appears on the screen before the
Compaq Diagnostics window opens.
You can display more or less information from anywhere
within Compaq Diagnostics for Windows by selecting Level
on the menu bar.
Compaq Diagnostics for Windows are designed to test
Compaq components. If non-Compaq components are tested,
the results may be inconclusive.
1. Access Compaq Diagnostics for Windows.
In Windows 95 or Windows 98 select StartÆ
SettingsÆControl PanelÆCompaq Diagnostics.
In Windows NT 4.0 select StartÆProgramsÆ
Administrative ToolsÆCompaq Diagnostics.
2. Select Categories, then select a category from the
drop-down list.
To save the information, select FileÆSave As.
To print the information, select FileÆPrint.
3. To close Compaq Diagnostics for Windows, select FileÆExit.
1. Access Compaq Diagnostics for Windows.
In Windows 95 or Windows 98 select StartÆ
SettingsÆControl PanelÆCompaq Diagnostics.
In Windows NT 4.0, select StartÆProgramsÆ
Administrative ToolsÆCompaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type.
Quick Test—Runs a quick, general test on each device in a
selected category.
Complete Test—Performs maximum testing on each
device in a selected category.