Compaq Armada V300 Series Reference Manual page 120

Using the
keyboard.
Using the key combination
the computer and external keyboards.
To exit QuickLock and QuickBlank once they have been initiated,
enter your power-on password.
QuickLock on Suspend cannot be initiated from the
keyboard.
The setup password prevents unauthorized users from changing
your computer configuration through Computer Setup.
Setup passwords can also be used by the network administrator to
protect and access the configuration of computers in a network.
After you establish the setup password, you must enter it
each time you want to change the computer configuration.
1. Run Computer Setup by turning on or restarting the computer
(StartÆShut DownÆRestart). When the blinking cursor
appears in the upper-right corner of the screen, press
2. Select the Security Menu.
3. Select setup password and press Enter.
4. Type your setup password. (You may use the same password
you are using for the power-on password.)
Type carefully because the password does not display as
you type it.
5. Type the password again to verify it.
6. Press F10.
7. Exit Computer Setup. Select FileÆSave changes and exit and
press Enter. When prompted to confirm your choice, press
F10.
hotkeys, which work only on the computer
which works on both