To use the embedded numeric keypad keys as standard keyboard
keys while the keypad is enabled:
Press and hold
lowercase.
Press and hold
typing in uppercase.
To set the computer to start up with the embedded
numeric keypad enabled—
1. Turn on or restart the computer, then press
blinking cursor appears upper-right on the screen.
To change the language, press
For navigation instructions, press
2. Select AdvancedÆDevice Options, then press
3. Toggle the field beside Num Lock State at Boot to On, then
press
4. To save your preferences, then close Computer Setup and
restart the computer, select FileÆSave Changes and Exit,
then press
5. When you are prompted to confirm your action, press
To disable the embedded numeric keypad at startup—
Repeat the above procedure with the Num Lock State at Boot
field toggled Off.
The embedded numeric keypad can be enabled or disabled
with
to use the keys as you would when typing in
to use the keys as you would when
in either startup state.
when the