Recommended Settings; Using Modem Commands And Dial Modifiers - Compaq Armada M300 Series Reference Manual

If you have problems connecting to the network or
NOTE:
operating the modem/NIC card, you may need to update or
reinstall the modem or LAN drivers. Refer to Chapter 7 for
instructions.

Recommended Settings

Model—
n
Select Start à Settings à Control Panel à Modem
n
or
Enter the initialization string
n
AT&F1&D2&C1E0V1S0=0.
COM port settings—Refer to Appendix D.
n
Fax class—Select 1.
n
Parity—Select NONE.
n
Word length—Select 8.
n
Stop bits—Select 1.
n
Hardware flow control—Select RTS/CTS.
n
Speed—Select the highest transmission speed or baud rate.
n
The maximum connection speed is determined by the
n
speed of the slowest modem on the connection. The
internal modem negotiates the fastest speed possible
with the remote modem.
The internal modem supports
n
Standard analog modem communication protocols
(for speeds up to 33.6 Kbps).
ITU-compatible V.90 and K56Flex protocols (for
higher
The V.90 and K56Flex protocols allow faster
n
downloads only from V.90 and K56flex–compliant
digital sources. Maximum achievable download
transmission rates are currently unknown, may not
reach 56Kbps, and will vary with line conditions.

Using Modem Commands and Dial Modifiers

You can configure most communications software without the use of AT
commands or dial modifiers.
speeds).
Using an Internal Modem (available on select models) 6-3