Selecting Communications Software; Configuring The Modem; Recommended Settings - Compaq Armada M300 Series Reference Manual

7-2 Using an Internal Modem (available on select models)

Selecting Communications Software

You can operate the modem with preinstalled or optional software. To use
preinstalled modem software, select StartÅPrograms. Then,

Configuring the Modem

The settings you may be required to enter vary among communications software
applications. As you enter these settings, the following information may be
helpful.

Recommended Settings

In Windows 95 select AccessoriesÅFaxÅCompose New Fax.
In Windows 98 or Windows NT 4.0 select RingCentral Fax.
Model—
Select StartÅSettingsÅControl PanelÅModem
or
Enter the initialization string AT&F1&D2&C1E0V1S0=0.
NOTE: Newer initialization strings may be available from the Compaq
Internet site at http://www.compaq.com.
COM port settings—Refer to Appendix D.
Fax class—Select 1.
Parity—Select NONE.
Word length—Select 8.
Stop bits—Select 1.
Hardware flow control—Select RTS/CTS.
Speed—Select the highest transmission speed or baud rate.
The maximum connection speed is determined by the speed of the
slowest modem on the connection. The internal modem negotiates
the fastest speed possible with the remote modem.