Table of Contents
Advertisement
To remove a drive from an Armada 7000 MultiBay Adapter with
one release latch
1. Apply light pressure to both the top and bottom of the release
latch on the right side of the adapter and pull it out slightly 1.
2. Push forward on the back of the drive 2 (without touching the
connector) until you can grasp the front of the drive.
3. Slide the drive out of the adapter 3.
Removing a Drive from an Armada 7000 Removable Drive MultiBay Adapter with One
Release Latch
Using Removable Drives 7-9
Advertisement
Table of Contents
