Linking with an Optional External Infrared Transceiver
You can use an optional External Infrared Transceiver to
Adjust the direction of infrared transmissions without moving
the desktop expansion base.
Increase the distance of infrared transmissions by the length of
the transceiver cable.
When an optional External Infrared Transceiver is connected to
the desktop expansion base
The infrared ports on the computer and the expansion base
are disabled.
The external infrared transceiver connector on the expansion
base is enabled.
To connect an External Infrared Transceiver to the system,
connect the transceiver cable to the external infrared transceiver
connector on the expansion base.
Using an Optional External Infrared Transceiver
3-10 Getting Connected