HP 2000-219 User Manual page 77

Secondary Master
Display Device
PS/2 Pointing
Devices
ZV Port
Quiet Boot
System Memory
Extended Memory
Advanced Menu
Serial port
Base I/O
address
IrDA port
Mode
Base I/O
address
DMA channel
Configuring the Pavilion Notebook with the BIOS Setup Utility
Sets the CD-ROM drive type and
various parameters.
Switches between the built-in display
(LCD), an external display (CRT) if
attached, and both.
Enables or disables the pointing
devices.
Sets whether zoomed video function
is enabled, to connect from a PC
card to a VGA controller.
When enabled, hides summary of
power-on self-test and messages
during boot.
Shows the system memory size.
Shows the extended memory size.
Sets how the serial port is configured
by the BIOS (specified or automatic).
Sets the I/O address and interrupt.
Sets how the infrared port is
configured by the BIOS (specified or
automatic).
When IrDA port is enabled, sets the
hardware to support SIR (Standard
IR) or FIR (Fast IR) infrared
communications. (Driver installation
is required.)
When IrDA port is enabled, sets the
I/O address and interrupt.
When Fast IR mode is enabled, sets
the DMA channel.
Configuring and Expanding Your Computer
CD-ROM drive detected and set
automatically.
LCD/CRT
Internal pointing device and
external PS/2 mouse are enabled
Disabled
Enabled
640KB
Detected automatically.
Default
Enabled
3F8 IRQ4
Disabled
SIR
2F8 IRQ3
DMA 3
User's Guide 77