HP 2000-219 User Manual page 127

Options:
Safety:
EMC:
Supplementary
Information:
Quality Department
Hewlett-Packard Company
Mobile Computing Division
Specifications and Regulatory Information
All
conforms to the following product specifications
IEC 950:1991+A1,A2 ,A3, A4 / EN 60950
(1992)+A1,A2, A3, A4 GB4943-1995
IEC 825-1:1993/EN60825-1:1994
CISPR 22:1993 / EN 55022 (1994): Class B [1]
GB9254-1988
EN 50082-1:1992
IEC 801-2:1991 / prEN 55024-2 (1992): 4kV CD,
8kV AD
IEC 801-3:1984 / prEN 55024-3 (1991): 3V/m
IEC 801-4:1988 / prEN 55024-4 (1992): 0.5 kV
signal lines, 1.0kV power lines
FCC Title 47 CFR, Part 15 Class B
ANSI C63.4: 1992
AS/NZS 3548: 1995 Rules and Regulations of
Class B
The product herewith complies with the requirements
of the Low Voltage Directive 73/23/EEC, EMC
Directive 89/336/EEC and IEC 825-1 and carries the
CE marking accordingly.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
The HP F1740A and F1454A AC/DC adapter used
with this product is designed to operate on all power
systems, other than IT power systems.
[1] The product was tested in a typical configuration
with Hewlett-Packard personal computer peripherals.
Regulatory Information
User's Guide 127