Keeping Fit With Your Swim Spa; Air Injection System; Swim Tether; Exercise Equipment - Cal Spas Swim-Pro F-1641 Owner's Manual

56

Keeping Fit With Your Swim Spa

Air Injection System

Use the control panel to start and stop the Air Injection System. The
JET 1 and JET 2 buttons control the top and bottom jets.
Use the air venturi valves to inject air in the water streams for even
more power.

Swim Tether

The swim tether pole has three pieces and assembles easily. Slide
the ends of the top and middle sections into the middle and bottom
sections.
Insert the tether in the anchor hole when you are ready to use it.
Buckle the strap around your waist. It is easily adjustable and can
accommodate most sizes.

Exercise Equipment

IMPORTANT: Always consult your physician before
starting any exercise activity or program. The Ultimate
Fitness series spas feature rubber exercise bands.
When stretched, these bands create a high tension
condition. Improper use or failure to connect the
exercise bands properly may cause injury. Always
inspect all of the exercise equipment prior to beginning
any exercise. Do not use any damaged equipment.
This equipment attaches to the exercise anchors
located on the spa walls.
Connecting the Exercise Equipment
The drawings below show different ways the exercise
kit can be connected depending on the exercises you
wish to do.
www.calspas.com
For 14 foot spas and model F1222
The exercise kit contains:
• Two hand grips
• Two ankle braces
• Two 6" elastic bands
• Two 18" elastic bands
• Two 25" elastic bands
• Two rowing bars
For 16 and 17 foot spas
The exercise kit contains:
• Two hand grips
• Two ankle braces
• Two 18" elastic bands
• Two 25" elastic bands
• Two 56" elastic bands
• Two rowing bars
2018 Fitness Spa
LTR20181146, Rev. M