Connecting To Device Or Network - Cal Spas Swim-Pro F-1641 Owner's Manual

Connecting to Device or Network

1
Direct connection
Range: About 20 feet
Range limit: Limited to the range
of the wi- module
HOW TO CONNECT TO IT:
Install the app on your phone or device -- see the following section "Installing the app".
Through home network with no internet access
2
Allows one local connection at a time
Range: About 50 feet
Range limit: Limited to the range of your
home router's signal
HOW TO CONNECT TO IT:
1. Install the app on your phone or device.
2. Exit the app and go to wi- settings on your phone or device.
3. Select and enable your local router.
4. Start the app. After you connect, select Settings on the home screen.
5. On the Settings screen, select Advanced, then on the Advanced screen, select Wi- Settings.
6. On the Wi- screen, select WPA. Then select the name of your home router from the drop-down menu.
7. Enter the SSID and Key for your router, the tap Save and select OK twice.
8. Close the app and re-start it to connect to your home network.
Through a network with internet access, using
3 Cloud connection or other hotspot connection
Allows unlimited simultaneous connections
Range: Worldwide
Range limit: Limited to 3G / 4G / hotspot
availability
HOW TO CONNECT TO IT:
Follow connection instructions from section (2) above. The Cloud icon appears
automatically when network connection is made. You can then connect to the
spa's wi- module.
Phone or
Your Wi-
other
spa signal
device
2018 Fitness Spa
LTR20181146, Rev. M
Internet cloud
Your home Local wi-
connection
network connection
router
Internet
3G or 4G
Wi-
Local hotspot
www.calspas.com
43