Indicator Leds And Factory Reset Button; Power/Error Indicator Led And Factory Reset Button; Power/Error Indicator Led And Power Modes; Wired Ethernet Connection - Teledyne FLIR A50 Series User Manual

16
Indicator LEDs and factory reset
button
For location of the indicator LEDs and the factory reset button, see Figure 6.1 View from
the rear, page 12.
16.1 Power/error indicator LED and factory
reset button
Note Do not hold down the factory reset button when connecting the camera to power.
Factory reset button Indicator LED status
depression time
period
> 1 second A continuous red light
> 4 seconds A flashing red light
> 10 seconds A rapidly flashing red
light
16.2 Power/error indicator LED and power
modes
Indicator LED status
Flashing blue light
Steady pink light
Steady red light

16.3 Wired Ethernet connection

Note Wireless network activity is not reflected by the indicator LEDs.
Indicator LED status
A flashing green light
No light (i.e., it is switched off).
#T810579; r. AB/78918/78918; en-US
Explanation
When the factory reset button is released:
• A factory reset is executed.
• The main camera application is restarted.
• The indicator LED status resumes the status it
had before the button was depressed.
When the factory reset button is released:
• A factory reset is executed.
• The main camera application is restarted.
• The camera's IP settings are reset to the fac-
tory defaults (DHCP assigned).
• The indicator LED status resumes the status it
had before the button was depressed.
When the factory reset button is released:
• A factory reset is executed.
• The camera's IP settings are reset to the fac-
tory defaults (DHCP assigned).
• All added users are deleted.
• All passwords are deleted.
• The camera is restarted.
Explanation
Normal operation.
Camera is booting up.
Camera malfunction.
Explanation
The camera is connected to a network and the
network activity is indicated.
The camera is not connected to any network.
54