Husqvarna T535iXP-35SN Operator's Manual page 28

As we are listing the maximum guide bar nose radius,
you may use a guide bar with smaller nose radius than
in our list. For guide bars of the same length, all
sprocket-nose guide bars of the same pitch and having
the same number of sprocket teeth may be considered
to have equivalent kickback energy.
Guide bar
Length, in Chain pitch, in
10 3/8
12
14
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
11/64 in/4,5
38
mm
Approved batteries for the product
Battery
Type
Battery capacity, Ah
Nominal voltage, V
Weight, lb/kg
Approved battery chargers for the product
Battery charger
Mains voltage, V
Frequency, Hz
28
Gauge, in
0.043
90° 30°
The following cutting equipment is approved for the
models Husqvarna T535i XP.
Saw chain
Max. nose radi- Type
us
7T Husqvarna H38
9T
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in/
0°
0,65 mm
BLi200
Lithium-ion
5.2
36
2.9/1.3
QC330
100-240
50-60
Length, drive
links (no.)
40
45
52
5056981-03 5795588-01
959 - 001 - 16.11.2018