Troubleshooting - Belkin F5D7050 User Manual

Troubleshooting

Troubleshooting
I can't connect to the Internet wirelessly.
If you are unable to connect to the Internet from a wireless
computer, please check the following items:
1.
Look at the lights on your wireless router. If you are using a
Belkin Wireless Router, the lights should be as follows:
• The "Power" light should be on.
• The "Connected" light should be on, and not blinking.
• The "WAN" light should be either on or blinking.
If your Belkin Wireless Router's lights match these descriptions,
go to number 2, below.
If this is NOT the case, please contact Belkin technical support.
If you are not using a Belkin Wireless Router, consult that router
manufacturer's user guide.
2.
Open your Wireless Setup Utility software by clicking on the icon
in the system tray at the bottom right-hand corner of the screen.
If you are using a Belkin Wireless Adapter, the tray icon should
look like this (the icon may be red or green):
3.
The exact window that opens will vary depending on the model
of Wireless Adapter you have; however, any of the utilities
should list "Available Networks", that is, networks to which you
can connect.
If you are using a Belkin Wireless G or Wireless G Plus Router,
"Belkin54g" is the default name.
If you are using a Belkin 802.11b Router, the default name
should be "WLAN".
If you are NOT using a Belkin Router, please consult your
router manufacturer's user manual for the default name.
32 32