Belkin F5D7050 User Manual page 17

Using the Belkin Wireless LAN Monitor Utility
Access Point (AP) List Tab
To view a list of all available networks in your area, select the
"AP List" tab. In this window, you will be presented with a list of
the available networks.
(a)
(b)
(c)
(e)
(d)
(f)
(g)
(a) Network Name
This column shows you the name of the wireless network that is
available. On the left side of the network name are small icons that
advise you of specific details about the network. A blue circle around
the network icon (e) indicates that you are currently connected to this
network. A small padlock icon (f) next to a network name indicates
that this network is secured (either by WEP or WPA encryption). It
is not possible to connect to a secured network without the proper
network key.
(b) Band
This column indicates on which band the network is operating. "G"
indicates that it is an 802.11g-based network. "B" indicates it is an
802.11b-based network.
(c) Signal
This column indicates the signal strength of the wireless network.
Typically, the stronger the signal strength, the closer the network is to
your physical location. The lower the signal strength, the farther away
from the network you are.
15 15
1
2
3
4
5
6
7
8
9