Belkin F5D7050 User Manual page 13

Installing and Setting up the USB Network Adapter
If you already have a wireless router (or an access point) in your
home or office, the Adapter will automatically attempt to connect
to your wireless network. In most cases, the Adapter will be able to
connect to your network automatically. If you are using encryption,
you will have to set the encryption settings of your Adapter to match
that of your wireless router (or access point), before the Adapter can
successfully connect to your wireless network. For information about
configuring your Adapter, see the section in this User Manual called
"Profile Tab: Creating a Profile" on page 16.
3.2
If you are using Windows 98SE or
Me, you will be asked to restart
your computer. Select "Restart". If
you are using Windows 2000 or XP,
you will see a window similar to
this one. Click "Finish".
3.3
When the installation is complete,
the Belkin Wireless LAN Monitor
Utility icon will appear on your
taskbar. To open the Utility,
double-click on this icon.
3.4
A small icon in your system tray
(bottom right corner of most screens)
will appear. This is your shortcut
to the Belkin Wireless LAN Monitor
Utility. It also indicates the status
of your connection:
Red: No connection to a
wireless network
Blue: Connected to a
wireless network
11 11
1
2
3
4
5
6
7
8
9