Belkin F5D7050 User Manual page 20

Using the Belkin Wireless LAN Monitor Utility Using the Belkin Wireless LAN Monitor Utility
(c)
We suggest that you leave the "Transfer Rate" box set on
"Automatic" unless there is a specific need to change this setting.
(b)
(c)
Click "Next" to continue.
3.
The next screen allows you to input security encryption settings
for the network. If the network is not encrypted, then leave the
mode set to "Off" and click "Complete".
If the network is encrypted, you will need to have the network key
and key type (open or shared). This information is the same as it is
for your wireless router or access point. In a larger-office setting,
this information is typically available from the network administrator.
TIP:
Most networks with WEP use the "Open System" key type.
For more detailed information, go to the section titled "Securing
your Wireless Network" on page 25 in this User Manual.
(a)
Select the "Authentication Mode" from the drop-down menu.
(a)
(b)
After selecting the "Authentication Mode", select the encryption
type your network uses from the "Encryption" drop-down
menu. Please see the section of this User Manual titled
"Securing your Wireless Network" on page 25 for information
on which type of WEP encryption to use. Click "Next".
18 18