Chevrolet Malibu 2007 Malibu Owner's Manual page 243

x w
SEEK : Press the down arrow to go to the
start of the current track if more than eight seconds
have played. If this arrow is pressed more than
once, the player continues moving backward
through the CD.
Press the up arrow to go to the start of the next
track. If this arrow is pressed more than once, the
player continues moving forward through the CD.
If either arrow is held or pressed for more than
two seconds, the CD enters CD scan mode and the
CD plays the first 10 seconds of each track. Press
either arrow again to stop scanning.
DISP (Display): Press this knob to see how long
the current track has been playing. T, the track
number, and the elapsed time of the track appears
on the display. To change the default on the
display, time or elapsed time, press the knob until
the desired option displays, then hold the knob for
two seconds. The radio produces one beep and the
selected display becomes the default. Pressing this
button also displays text on commercially recorded
CDs (if available).
AUTO TONE/AUTO EQ (Automatic
Equalization): Press this button to select the
desired equalization setting while playing a CD.
The equalization is automatically recalled when a
CD is played. For more information, see AUTO
TONE/AUTO EQ listed previously in this section.
BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD remains
inside the radio for future listening.
SRCE (Source): Press this button to play a
CD or to access a remote device (if installed)
while listening to the radio.
EJECT / (Eject): Press this button to eject
Z
a CD. Eject may be activated with either the
ignition or radio off. CDs can be loaded with the
ignition and radio off if this button is pressed first.
243