Chevrolet Malibu 2007 Malibu Owner's Manual page 242

If these problems occur, check the bottom surface
of the CD. If the surface of the CD is damaged,
such as cracked, broken, or scratched, the CD will
not play properly. If the surface of the CD is soiled,
see Care of Your CDs and DVDs on page 284 for
more information.
If there is no apparent damage, try a known
good CD.
Do not add any label to a CD, it could get caught in
the CD player. If a CD is recorded on a personal
computer and a description label is needed, try
labeling the top of the recorded CD with a
marking pen.
Notice: If you add any label to a CD, insert
more than one CD into the slot at a time, or
attempt to play scratched or damaged CDs, you
could damage the CD player. When using the
CD player, use only CDs in good condition
without any label, load one CD at a time, and
keep the CD player and the loading slot free of
foreign materials, liquids, and debris.
If an error displays, see "CD Messages" later in
this section.
242
(Reverse): Press and hold this pushbutton to
s
reverse quickly within a track. You will hear sound
at a reduced volume. Release the button to play the
passage. The elapsed time of the track displays.
(Fast Forward): Press and hold this
\
pushbutton to advance quickly within a track. You
will hear sound at a reduced volume. Release
the button to play the passage. The elapsed time
of the track displays.
RPT (Repeat): Press this button once to hear a
track over again. REPEAT ON and RPT displays.
The current track continues to repeat. Press
RPT again to turn off repeat play. REPEAT OFF
displays and RPT disappears.
RDM (Random): Press this button to hear the
tracks in random, rather than sequential, order.
T#, RANDOM, and RDM displays, T and the track
number displays when each track starts to play.
Press RDM again to turn off random play.
RANDOM OFF displays and RDM disappears.