Chevrolet Malibu 2007 Malibu Owner's Manual page 226

LIGHT FLASH: If your vehicle has Remote
Keyless Entry (RKE), this option which allows the
vehicle's exterior perimeter lighting to flash every
time the lock, unlock, or trunk release buttons on
the RKE transmitter are pressed, can be enabled or
disabled. When LIGHT FLASH appears on the
display, press the enter button to move between
OFF and ON. When you have made your choice,
press the MENU button to record your selection.
The initial setting from the factory is ON.
DELAY LOCK: The delayed locking option, which
delays the actual locking of the vehicle, can be
enabled or disabled. When DELAY LOCK appears
on the display, press the enter button to move
between OFF and ON. When you have made your
choice, press the MENU button to record your
selection. The initial setting from the factory is ON.
AUTO UNLK (Unlock): The automatic door
unlocking option, which allows the vehicle to
automatically unlock certain doors can be enabled
or disabled. When AUTO UNLK appears on the
display, press the enter button to move between
ALL, DRIVER, or NONE. When you have made
your choice, press and the MENU button to record
your selection. The initial setting from the factory is
ALL. See Programmable Automatic Door Locks on
page 110 for more information.
226
UNLK (Unlock): This screen displays only if
DRIVER or ALL is selected for the AUTO UNLK
option. This option determines when the automatic
door unlocking will occur, when either the key
is turned to OFF or the vehicle is shifted into
PARK (P). When UNLK appears on the display,
press the enter button to move between KEY OFF
and SHIFT TO P (Park). When you have made your
choice, press the MENU button to record your
selection. The initial setting from the factory is
SHIFT TO P (Park). See Programmable Automatic
Door Locks on page 110 for more information.
EXT (Exterior) LIGHTS: If your vehicle has
Remote Keyless Entry (RKE), this option, which
allows the vehicle's exterior perimeter lighting to
turn on each time the unlock button on the RKE
transmitter is pressed, can be enabled or disabled.
When EXT LIGHTS appears on the display, press
the enter button to move between ON and OFF.
When you have made your choice, press the MENU
button to record your selection. The initial setting
from the factory is ON.