Nwa5301-Nj - ZyXEL Communications NWA1123ACPRO-EU0101F User Manual

Table 7 NWA1123-AC PRO and WAC6103D-I LEDs (continued)
LED
Locator

1.6.3 NWA5301-NJ

The LEDs automatically turn off when the NWA5301-NJ is ready. You can press the LED ON button for one
second to turn on the LEDs again. The LEDs will blink and turn off after two minutes.
Figure 7 NWA5301-NJ LEDs
The following are the LED descriptions for your NWA5301-NJ.
Table 8 NWA5301-NJ LEDs
LABEL
PWR/SYS
PoE
Chapter 1 Introduction
COLOR STATUS
White Blinking
Off
COLOR STATUS
Amber Slow Blinking (On for 1s,
Off for 1s)
Green On
Amber Off
Green On
Amber Slow Blinking (blink for 3
times, Off for 3s)
Green On
Amber On
Green Off
Amber Fast Blinking (On for
50ms times, Off for
50ms)
Green Off
Amber Slow Blinking (blink for 3
times, Off for 3s)
Green Off
Amber Slow Blinking (blink for 2
times, Off for 3s)
Green Off
Green On
Off
NWA / WAC Series User's Guide
DESCRIPTION
The Locator is activated and will show the actual location
of the NWA/WAC between several devices in the
network.
The Locator function is off.
DESCRIPTION
The NWA is booting up.
The NWA is ready for use.
The NWA is discovering an AP controller
The NWA failed to boot up or is experiencing system
failure.
The NWA is undergoing firmware upgrade.
The Uplink port is disconnected.
The wireless module of the WAC is disabled or failed.
Power is supplied to the yellow PoE Ethernet port (LAN1).
There is no power supply.
24