SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
Schedule
Daily Check:
Before Beginning Operation & Every 8 Hours
of Operation:
47–48
Every 40 Hours of Operation:
After First 3 Months of Operation and
Annually:
Page 51
Pages
Page 48
Page 50
Page 49
Page 50
Page 47
Cleaning &
Protecting
DO NOT use compressed air to blow away
chips from the lathe to avoid the risk of
flying metal debris injuring yourself or oth-
ers, or driving the chips deep into the lathe
mechanisms resulting in damage or prema-
ture wear.
ACCESSORIES
Page 42