7.
56
Side
View
Figure 56.
8.
9.
Figure 57.
Figure
Front
View
Figure 57
NOTICE
For smooth operation and to reduce wear
of the change gears, always make sure to
clean away debris and built-up grime, then
apply a light film of multi-purpose gear
grease to the gear teeth.
10.
Note: It may be necessary to re-position the
middle change gears on the pivot bracket
to properly mesh with the top and bottom
gears.
11.
Note: Setting the gears too tight will cause
excessive wear and noise. Setting the gears
too loose may cause slippage and gear tooth
breakage.
12.