Table of Contents

Advertisement

Quick Links

HP 4320t Mobile Thin Client
Administrator Reference Guide

Advertisement

Table of Contents
loading

Summary of Contents for HP XA664AA

  • Page 1 HP 4320t Mobile Thin Client Administrator Reference Guide...
  • Page 2 Logo is a trademark of its proprietor. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...
  • Page 5: Table Of Contents

    Bottom ..........................8 Wireless antennas ....................... 8 Identifying the labels ..........................9 2 HP Write Filters ............................. 11 File-Based Write Filter ........................11 Using the File-Based Write Filter command line utility ............11 Using the File-Based Write Filter configuration interface ........... 12 Using the File-Based Write Filter status utility ..............
  • Page 6 4 Applications ..............................19 Remote Desktop Connection ......................19 HP Remote Graphics Software (RGS) ....................19 TeemTalk Terminal Emulation ......................19 HP Device Manager ........................... 19 HP Client Automation ......................... 19 HP ThinState Capture ........................20 HP ThinState Deploy ......................20 Microsoft Internet Explorer .........................
  • Page 7 Using battery power ........................... 28 Displaying the remaining battery charge ................28 Inserting or removing the battery ..................28 Charging a battery ......................29 Managing low battery levels ....................30 Identifying low battery levels ................30 Resolving a low battery level ................30 Resolving a low battery level when external power is available ..
  • Page 8 9 Modem and LAN ............................42 Using a modem ..........................42 Connecting a modem cable ....................42 Connecting a country- or region-specific modem cable adapter ........43 Selecting a location setting ....................44 Viewing the current location selection ............... 44 Adding new locations when traveling ..............
  • Page 9 14 Hardware upgrades ............................ 57 Identifying installed drives ........................57 Handling drives ........................... 57 Using optical drives (select models only) ................... 57 Inserting an optical disc (CD or DVD) ................58 Removing an optical disc (CD or DVD) ................58 When the disc tray opens ..................
  • Page 11: Notebook Tour

    Notebook tour Identifying the hardware Components included with the computer may vary by region and model. The illustrations in this chapter identify the standard features on most computer models. Display NOTE: Your computer may look slightly different from the illustration in this section. Component Description Internal display switch...
  • Page 12: Top

    Pointing devices Component Description TouchPad off indicator To turn the TouchPad zone on and off, quickly double- tap the TouchPad off indicator. NOTE: When the TouchPad zone is on, the light is off. TouchPad zone* Moves the pointer and selects or activates items on the screen.
  • Page 13: Lights

    Lights Component Description ● TouchPad off indicator On: The TouchPad zone is off. ● Off: The TouchPad zone is on. Caps lock light On: Caps lock is on. ● Power light On: The computer is on. ● Blinking: The computer is in the Sleep state. ●...
  • Page 14: Buttons, Switches, And Speakers

    Buttons, switches, and speakers Component Description Speakers (2) Produce sound. Internal display switch Turns off the display if the display is closed while the power is on. ● Power button When the computer is off, press the button to turn on the computer.
  • Page 15: Keys

    Keys Component Description Displays system information when pressed in combination with the key. Executes frequently used system functions when pressed in combination with a function key or the key. Windows logo key Displays the Windows Start menu. Function keys Execute frequently used system functions when pressed in combination with the key.
  • Page 16: Front

    Front Component Description Drive light Blinking: The flash drive or optional optical drive is being accessed. Media Card Reader Supports the following optional digital card formats: ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● MultiMediaCard 4.2 (MMC Plus, including MMC Plus HC) ●...
  • Page 17: Right Side

    Right side Component Description USB 2.0 ports (2) Connect optional USB devices. RJ-11 (modem) jack Connects a modem cable. Optical drive light (select models only) Blinking: The optical drive is being accessed. Optical drive eject button (select models only) Press to eject the optical disc. Optical drive (select models only) Reads optical discs.
  • Page 18: Bottom

    Component Description External monitor port Connects an external VGA monitor or projector. RJ-45 (network) jack Connects a network cable. HDMI port Connects an optional HDMI device. Combo eSATA/USB 2.0 port Connects an optional USB device or a high-performance eSATA component, such as an eSATA external hard drive. USB 2.0 port Connects an optional USB device.
  • Page 19: Identifying The Labels

    Component Description WLAN antennas (2) Send and receive wireless signals to communicate with wireless local area networks (WLANs). NOTE: For optimal transmission, keep the areas immediately around the antennas free from obstructions. To see wireless regulatory notices, refer to the section of the Regulatory, Safety, and Environmental Notices that applies to your country or region.
  • Page 20 Component Description Serial number (s/n) An alphanumeric identifier that is unique to each product. Part number/Product number (p/n) The number that provides specific information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. Warranty period The duration of the warranty period for this computer.
  • Page 21: Hp Write Filters

    HP Write Filters The File-Based Write Filter (FBWF) and the Enhanced Write Filter (EWF) provide two distinct ways to provide a secure environment for your computer by protecting it from unauthorized writes to storage and file systems. FBWF operates at the file level, and EWF operates at the sector level. Only one write filter can be selected and active at one time.
  • Page 22: Using The File-Based Write Filter Configuration Interface

    If you are logged on as an administrator, you can change the status of FBWF by right-clicking the icon and selecting the desired FBWF state. NOTE: Because the fbwfmgr.exe utility and the FBWF status service execute separate code, status changes made by fbwfmgr.exe are not automatically reflected by the FBWF status icon. Chapter 2 HP Write Filters...
  • Page 23: Enhanced Write Filter

    If you use the command line to modify the FBWF, right-click the icon to refresh the status icon display (click anywhere on the screen to close the context menu). The status icon display is refreshed automatically when you make modifications through the FBWF Control Panel utility. The FBWF utility always reflects the current status.
  • Page 24: Using The Enhanced Write Filter Configuration Interface

    Clear Boot Command Clears the boot command from the DOS prompt. ● Commit Data to Volume Commits all current-level data in the overlay to the protected volume, and resets the current overlay value to 1. Chapter 2 HP Write Filters...
  • Page 25: Using The Enhanced Write Filter Status Utility

    Using the Enhanced Write Filter status utility The EWF status utility creates an icon in the notification area of the taskbar that shows the status of the filter. You can right-click the icon to display and execute the available options. The EWF Status icon displays the following states: ●...
  • Page 26: Configuration

    The following sections describe the local drives on your computer. Drive Z Drive Z (HP RAMDisk) is a virtual drive that is created from the system's physical RAM. The RAMDisk will look and behave like a standard fixed disk drive, but it is created at system startup and destroyed at system shutdown.
  • Page 27: Mapping Network Drives

    careful of application settings that write to the C drive, which resides in flash memory (in particular, many applications by default write cache files to the C drive on the local system). If you must write to a local drive, change the application settings to use the Z drive. To minimize writing to the C drive, update the configuration settings.
  • Page 28 To create a user profile, follow these steps: Log on as Administrator. Select Start > Control Panel > Administrative Tools. Double-click Computer Management. The Local Users and Groups window opens. Double-click the Users folder to view the contents in the right pane. Click Action in the menu bar, and then click New User.
  • Page 29: Applications

    HP Remote Graphics Software (RGS) HP RGS is an advanced utility that allows a user to access and share the desktop of a remote computer over a standard network. All applications run natively on the remote computer and take full advantage of the computer and graphics resources of the sending computer.
  • Page 30: Hp Thinstate Capture

    The HP ThinState Capture utility formats and makes the USB flash drive bootable. HP ThinState Capture will now reboot the system. Follow the on-screen instructions. You can now use the USB flash drive to deploy the captured image to another HP computer of the identical model and hardware. HP ThinState Deploy...
  • Page 31: Pointing Devices And Keyboard

    Pointing devices and keyboard Using pointing devices To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go. Use the TouchPad buttons like the corresponding buttons on an external mouse. Setting pointing device preferences To access Mouse Properties, select Start >...
  • Page 32: Displaying System Information

    Function Hotkey Display system information. fn+esc Decrease screen brightness fn+f2 Increase screen brightness fn+f3 Switch the screen image between computer display and fn+f4 external display. Launch Internet Explorer fn+f6 Mute speaker sound. fn+f7 Decrease speaker sound. fn+f8 Increase speaker sound. fn+f9 Play previous track.
  • Page 33: Muting Speaker Sound

    Most external monitors receive video information from the computer using the external VGA video standard. The fn+f4 hotkey can also alternate images among other devices receiving video information from the computer. The following video transmission types, with examples of devices that use them, are supported by the fn+f4 hotkey: ●...
  • Page 34: Using The Embedded Numeric Keypad

    Component Description Executes frequently used system functions when pressed in combination with a function key or the key. Embedded numeric keypad Can be used like the keys on an external numeric keypad. num lk Enables the embedded numeric keypad when pressed in combination with the key.
  • Page 35: Switching Key Functions On The Embedded Numeric Keypad

    Switching key functions on the embedded numeric keypad You can temporarily alternate the functions of keys on the embedded numeric keypad between their standard keyboard functions and their keypad functions by using the key or the fn+shift combination. ● To change the function of a keypad key to keypad functions while the keypad is disabled, press and hold the key while pressing the keypad key.
  • Page 36: Power

    Power Power control and light locations The following illustration and table identify and describe the power control and light locations. Component Description Internal display switch Turns off the display if the display is closed while the computer is ● Power button When the computer is off, press the button to turn on the computer.
  • Page 37: Shutting Down The Computer

    Shutting down the computer The Shut Down command closes all open programs, including the operating system, and then turns off the display and computer. Shut down the computer under any of the following conditions: ● When you need to replace the battery or access components inside the computer ●...
  • Page 38: Using The Power Meter

    WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Computer battery life varies, depending on power management settings, programs running on the computer, display brightness, external devices connected to the computer, and other factors.
  • Page 39: Charging A Battery

    To insert the battery, follow these steps: Turn the computer upside down on a flat surface, with the battery bay toward you. Insert the battery into the battery bay (1) until it is seated. The battery release latches (2) automatically lock the battery into place. To remove the battery, follow these steps: Turn the computer upside down on a flat surface, with the battery bay toward you.
  • Page 40: Managing Low Battery Levels

    The battery charges whether the computer is off or in use, but it charges faster when the computer is off. Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer or cooler than room temperature.
  • Page 41: Resolving A Low Battery Level When External Power Is Available

    Resolving a low battery level when external power is available Connect one of the following devices: ▲ ● AC adapter ● Optional docking device ● Optional power adapter Resolving a low battery level when a charged battery is available Turn off the computer. Remove the discharged battery, and then insert a charged battery.
  • Page 42: Using External Ac Power

    External AC power is supplied through one of the following devices: WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP. ● Approved AC adapter ●...
  • Page 43 Plug the other end of the power cord into an AC outlet (3). Using external AC power...
  • Page 44: Multimedia

    Multimedia Using multimedia hardware Using the audio features The following illustration and table describe the audio features of the computer. Component Description Internal microphone Records sound. Speakers (2) Produce sound. Audio-out (headphone) jack Connects optional powered stereo speakers, headphones, ear buds, a headset, or television audio.
  • Page 45: Using The Audio-In (Microphone) Jack

    Using the audio-in (microphone) jack The computer is equipped with a stereo (dual-channel) microphone jack that supports an optional stereo array or monaural microphone. Using sound recording software with external microphones allows for stereo recordings. When connecting a microphone to the microphone jack, use a microphone with a 3.5-mm plug. Using the audio-out (headphone) jack WARNING! To reduce the risk of personal injury, adjust the volume before putting on headphones,...
  • Page 46: Using The Hdmi Port

    ▲ To connect a display device, connect the device cable to the external monitor port. NOTE: If a properly connected external display device does not display an image, press fn+f4 transfer the image to the device. Repeatedly pressing fn+f4 alternates the screen image between the computer display, the device, and simultaneous display on both the computer display and the device.
  • Page 47: Using Multimedia Software

    To connect a video or audio device to the HDMI port, follow these steps: Plug one end of the HDMI cable into the HDMI port on the computer. Connect the other end of the cable to the video device, according to the device manufacturer's instructions.
  • Page 48: Preventing Playback Disruptions

    – or – Insert the media disc, such as an audio CD, into the optical drive. Click a multimedia task from the list of tasks. Preventing playback disruptions To reduce the possibility of playback disruption: ● Save your work and close all open programs before playing a CD or a DVD. ●...
  • Page 49: Wireless

    Wireless About integrated wireless devices Wireless technology transfers data across radio waves instead of wires. Your computer may be equipped with a wireless local area network (WLAN) device. This device connects the computer to wireless local area networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and universities.
  • Page 50: Setting Up A Wlan

    NOTE: You must commit these changes in order for them to be saved. For additional information, refer to HP Write Filters on page NOTE: The functional range (how far your wireless signals travel) depends on WLAN implementation, router manufacturer, and interference from other electronic devices or structural barriers such as walls and floors.
  • Page 51: Using Wireless Security Features

    ● Use a firewall. ● Set security on your Web browser. For more information about WLAN security, see the HP Web site at http://www.hp.com/go/wireless (English only). Identifying a WLAN device If you have a problem connecting to a wireless network, follow these steps to confirm that the integrated WLAN device is properly installed on your computer: Click Start, and then click All Programs.
  • Page 52: Modem And Lan

    Modem and LAN Using a modem The modem must be connected to an analog telephone line by using a 6-pin, RJ-11 modem cable (purchased separately). In some countries or regions, a specific modem cable adapter is also required. Jacks for digital PBX systems may resemble analog telephone jacks, but they are not compatible with the modem.
  • Page 53: Connecting A Country- Or Region-Specific Modem Cable Adapter

    Connect the modem cable into the RJ-11 telephone wall jack (2). Connecting a country- or region-specific modem cable adapter Telephone jacks vary by country or region. To use the modem and the modem cable outside the country or region in which you purchased the computer, you must obtain a country- or region-specific modem cable adapter.
  • Page 54: Selecting A Location Setting

    You must commit these changes in order for them to be saved. For additional information, refer to HP Write Filters on page Adding new locations when traveling By default, the only location setting available to the modem is a location setting for the country or region in which you purchased the computer.
  • Page 55 An analog telephone line supports one of 2 dialing modes: pulse dialing or tone dialing. These dialing mode options are selected in the Phone and Modem Options settings. The dialing mode option selected must match the dialing mode supported by the telephone line in your location. To determine the dialing mode supported by a telephone line, dial a few digits on the telephone, and then listen for clicks (pulses) or tones.
  • Page 56: Connecting To A Local Area Network

    Connecting to a local area network Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased separately). If the network cable contains noise suppression circuitry (1), which prevents interference from TV and radio reception, orient the circuitry end of the cable (2) toward the computer. To connect the network cable, follow these steps: Connect the network cable into the network jack (1) on the computer.
  • Page 57: 10 Security

    10 Security Protecting the computer NOTE: Security solutions are designed to act as deterrents. These deterrents may not prevent a product from being mishandled or stolen. Your computer is designed for security. All information is saved to the network and no user information can be stored on the computer.
  • Page 58: Setting Passwords In Windows

    You can use the same password for a Computer Setup feature and for a Windows security feature. You can also use the same password for more than one Computer Setup feature. Use the following tips for creating and saving passwords: ●...
  • Page 59: Administrator Logon

    Start. Click Shut Down, and then click Log Off. The Administrator logon screen is displayed. You can use the HP Windows Logon Configuration Manager to permanently modify the default logon user. Setting passwords in Computer Setup...
  • Page 60: Entering A Setup Password

    Your preferences go into effect when the computer restarts. Entering a setup password At the Setup password prompt, type your setup password (using the same kind of keys you used to set the password), and then press enter. After 3 unsuccessful attempts to enter the setup password, you must restart the computer and try again.
  • Page 61: 11 Connecting Hardware

    11 Connecting hardware Using a USB device Universal Serial Bus (USB) is a hardware interface that can be used to connect an optional external device, such as a USB keyboard, mouse, drive, printer, scanner, or hub. Devices can be connected to the computer or an optional docking device.
  • Page 62: Using The Usb Storage Options Utility

    Using the USB Storage Options utility To enable or disable the USB ports, follow these steps: Select Start > Control Panel > USB Storage Security Options. Select the permissions for the computer, and then click OK. Chapter 11 Connecting hardware...
  • Page 63: 12 Using Media Card Reader Cards

    12 Using Media Card Reader cards Optional digital cards provide secure data storage and convenient data sharing. These cards are often used with digital media-equipped cameras and PDAs as well as with other computers. The Media Card Reader supports the following digital card formats: ●...
  • Page 64: Removing A Digital Card

    Removing a digital card CAUTION: To prevent loss of data or an unresponsive system, use the following procedure to safely remove the digital card. To remove a digital card, follow these steps: Save your information and close all programs associated with the digital card. To eject the digital card, press in on the card (1), and then remove it from the slot (2).
  • Page 65: 13 Using Expresscards

    13 Using ExpressCards An ExpressCard is a high-performance PC Card that is inserted into the ExpressCard slot. Your computer supports ExpressCard/34 cards. Like standard PC Cards, ExpressCards are designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). Configuring an ExpressCard Install only the software required for your device.
  • Page 66: Removing An Expresscard

    Insert the card into the ExpressCard slot, and then push in on the card until it is firmly seated. You will hear a sound when the device has been detected, and a menu of available options may be displayed. NOTE: The first time you insert an ExpressCard, a message is displayed in the notification area to let you know the card is recognized by the computer.
  • Page 67: 14 Hardware Upgrades

    Identifying installed drives To view the drives installed on the computer, follow these steps: Click Start, and then click All Programs. Click Hewlett-Packard, and then click HP System Information. Click System Information to launch the Microsoft® System Information utility. Handling drives Drives are fragile computer components that must be handled with care.
  • Page 68: Inserting An Optical Disc (Cd Or Dvd)

    Optical drive type Read from CD and Write to CD-RW Write to DVD±RW Write to DVD+R DL DVD-ROM discs discs discs discs DVD-ROM CAUTION: To prevent possible audio and video degradation, or loss of audio or video playback functionality, do not initiate Sleep while reading from a CD or DVD. If Sleep is initiated during playback of a disc, you may experience the following behaviors: ●...
  • Page 69: When The Disc Tray Opens

    When the disc tray opens Press the release button (1) on the drive bezel to release the disc tray, and then gently pull out the tray (2) until it stops. Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc.
  • Page 70: Using External Drives

    Remove the disc (3) from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces. NOTE: If the tray is not fully accessible, tilt the disc carefully as you remove it. Close the disc tray and place the disc in a protective case.
  • Page 71: Using An Optional External Multibay Or External Multibay Ii

    CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be sure that the device is turned off and the AC power cord is unplugged. Connect the device to the computer. If you are connecting a powered device, plug the device power cord into a grounded AC outlet. Turn on the device.
  • Page 72 Remove the screws from the battery area. Turn the computer display-side up, and open the computer as far as possible. NOTE: Do not use excessive force to open the computer beyond the limits of the display hinges. Forcing extension beyond these limits will cause damage to the display. Slide the switch cover straight back toward the display (1), and then remove the switch cover (2).
  • Page 73 Remove the screws from the keyboard. Slide the keyboard back toward the display (1), and then rotate it to the right side (2). CAUTION: Do not rip the keyboard cable. If you are replacing a memory module, remove the existing memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 74 Grasp the edge of the memory module (2), and gently pull the module out of the memory module slot. To protect a memory module after removal, place it in an electrostatic-safe container. Insert a new memory module: CAUTION: To prevent damage to the memory module, hold the memory module by the edges only.
  • Page 75 Gently press the memory module (3) down, applying pressure to both the left and right edges of the memory module, until the retention clips snap into place. Turn the keyboard over (1) into the keyboard tray, and then slide the keyboard (2) into place. Inserting and replacing memory modules...
  • Page 76 Replace the screws on the keyboard. Place the switch cover on top of the switch cover tray (1), and then slide the switch cover into place (2). Close the display. Turn the computer upside down on a flat surface, with the battery bay toward you. Chapter 14 Hardware upgrades...
  • Page 77 Replace the screws in the battery area. Replace the battery. Turn the computer right-side up, and then reconnect external power and external devices. Turn on the computer. Inserting and replacing memory modules...
  • Page 78: 15 Multiboot

    Computer Setup. You can also manually choose the device to boot from by pressing when the system is first powered-on and the HP logo is displayed. The message is displayed in the lower- middle corner of the screen when the computer starts up. Pressing displays a menu that shows the current boot devices and allows you to select a boot device.
  • Page 79: Considering Boot Order Changes

    “F10 BIOS Setup" message is displayed in the lower-middle corner of the screen. You can also press when the HP Logo is being displayed and the "F10 BIOS Setup" string is not displayed anymore. To enable bootable media in USB drives or in drives inserted into an optional docking device (select models only), use the arrow keys to select System Configuration >...
  • Page 80: Setting A New Boot Order In Computer Setup

    Setting a new boot order in Computer Setup To set a boot device order that the computer uses each time it is turned on or restarted, follow these steps: Open Computer Setup by turning on or restarting the computer, and then pressing while the “F10 ROM Based Setup"...
  • Page 81: Entering Multiboot Express Preferences

    Entering MultiBoot Express preferences When the Express Boot menu displays during startup, you have the following choices: ● To specify a boot device from the Express Boot menu, select your preference within the allotted time, and then press enter. ● To prevent the computer from defaulting to the current MultiBoot setting, press any key before the allotted time expires.
  • Page 82: 16 Computer Setup

    16 Computer Setup Starting Computer Setup Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.
  • Page 83: Restoring Factory Settings In Computer Setup

    – or – Use the tab key and the arrow keys to select File > Save changes and exit, and then press enter. Your changes go into effect when the computer restarts. Restoring factory settings in Computer Setup NOTE: Restoring defaults will not change the hard drive mode. To return all settings in Computer Setup to the values that were set at the factory, follow these steps: Turn on or restart the computer, and then press while the “Press the ESC key for Startup...
  • Page 84: Security Menu

    Select To do this Ignore changes and exit Cancel any changes entered during the current session. Then exit and restart the computer. Save changes and exit Save any changes entered during the current session. Then exit and restart the computer. Your changes go into effect when the computer restarts.
  • Page 85 Select To do this ● Device Configurations Enable/disable USB legacy support (enabled by default). When enabled, USB legacy support allows the following: ◦ Use of a USB keyboard in Computer Setup even when a Windows® operating system is not running. ◦...
  • Page 86 Select To do this ● Built-In Device Options Enable/disable the wireless button state (enabled by default). ● Enable/disable the embedded WLAN device (enabled by default). ● Enable/disable LAN/WLAN switching (disabled by default). ● Enable/disable the Network Interface Controller (LAN) (enabled by default). ●...
  • Page 87: Appendix A Routine Care

    Routine care Cleaning the display CAUTION: To prevent permanent damage to the computer, never spray water, cleaning fluids, or chemicals on the display. To remove smudges and lint, frequently clean the display with a soft, damp, lint-free cloth. If the screen requires additional cleaning, use premoistened antistatic wipes or an antistatic screen cleaner.
  • Page 88 ● If you are shipping the computer or a drive, place it in a bubble-pack mailer or other suitable protective packaging and label the package “FRAGILE.” ● If the computer has a wireless device or a cell phone device installed, such as an 802.11b/g, a Global System for Mobile Communications (GSM), or a General Packet Radio Service (GPRS) device, note that the use of these devices may be restricted in some environments.
  • Page 89: Index

    Index buttons 7 connecting to a WLAN 40 AC adapter, connecting 32 left TouchPad 2 connection, external power 32 conservation, power 31 adapter, modem cable 43 power 4, 26 administrator password 48 right TouchPad 2 cord, power 78 airport security devices 57 corporate WLAN connection 40 antennas 8 critical battery level 30...
  • Page 90 ExpressCard HP Remote Graphics Software service tag 9 configuring 55 wireless certification 10 defined 55 HP ThinState Capture 20 WLAN 10 inserting 55 HP ThinState Deploy 20 language, changing in Computer removing 56 HP Write Filters 11 Setup 74 removing insert 55...
  • Page 91 58 USB flash drive 20 temperature 31 removing 58 restore the factory settings 73 ThinState Capture 20 optical drive 60 RGS (HP Remote Graphics ThinState Deploy 20 identifying 7 Software) 19 TouchPad using 38 right TouchPad button, buttons 2...
  • Page 92 TeemTalk Terminal Emulation 19 USB Storage Options 51 vent, identifying 7 video transmission types 23 Virtualization Technology 75 volume decrease hotkey 35 volume increase hotkey 35 volume mute hotkey 35 volume, adjusting 35 Windows applications key, identifying 5 Windows logo key, identifying 5 wireless antennas, identifying 8 wireless certification label 10 wireless key, identifying 5...

This manual is also suitable for:

Mobile thin client 4320t

Table of Contents