Network Specifications - Epson WorkForce WF-7830 Series User Manual

Product Information

Network Specifications

Wi-Fi Specifications
Standards
Frequency Range
Coordination Modes
*4
Wireless Securities
*1 IEEE802.11n is only available for the HT20.
*2 Not supported for IEEE 802.11b.
*3 Simple AP mode is compatible with a Wi-Fi connection (infrastructure) or an Ethernet connection.
*4 Wi-Fi Direct supports WPA2-PSK (AES) only.
*5 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards
Communication Mode
Connector
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2 The connected device should comply with IEEE802.3az standards.
> >
Product Specifications
IEEE802.11b/g/n
2.4 GHz
Infrastructure, Wi-Fi Direct (Simple AP)
WEP (64/128bit), WPA2-PSK (AES)
Network Specifications
*1
*2*3
*5
, WPA3-SAE (AES)
*1
IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet)
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps
Full duplex, 100Mbps Half duplex
RJ-45
289
*2