Message Alert; Remote Code - AT&T CD4930 Manual

Answering system
Answering system settings

Message alert

If the message alert is set to On, you can hear the telephone beeps every 15
seconds when there are new messages.
To change the setting:
1. When the telephone is in idle mode, press
MENU/
SELECT
2. Press /SELECT again to select Answering sys.
MENU
3. Press
CALL LOG
alert, then press
4. Press
CALL LOG
or Off.
/SELECT to save the setting. There is
5. Press
MENU
a confirmation tone and the screen returns to the
previous menu.

Remote code

To access your answering system remotely from any touch-tone phone, you
need to enter a three-digit number. The default remote access code is 500.
To change the remote code:
1. When the telephone base is in idle mode, press
MENU/
SELECT
2. Press /SELECT again to select Answering sys.
MENU
3. Press
CALL LOG
code, then press
4. Use the dialing keys to enter a three-digit number.
5. Press /SELECT to save the setting. You hear
MENU
a confirmation tone and the screen returns to the
previous menu.
to enter the main menu.
or
q p
DIRECTORY
/SELECT.
MENU
or
q p
DIRECTORY
to enter the main menu.
or
q p
DIRECTORY
/SELECT.
MENU
to scroll to Message
to choose On
to scroll to Remote

Call screening
>Message alert
p
q
On
>Off
p
Message alert
>Remote code
p
q
Remote code
500