Review Directory Entries - AT&T CD4930 Manual

Directory
Directory
6. Press /SELECT. The screen shows Enter name.
MENU
7. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Each time you press a key, the character on that
key appears. Additional key presses produce
other characters on that key. See the chart on the
previous page.
Press

CALL LOG
cursor to the left or right.
Press DELETE X to erase a character. .

8. Press /SELECT to store your new directory
MENU
entry. There is a confirmation tone and the screen
shows Saved. To change the entry later, see
page 22.
NOTE: Numbers can be up to 24 digits and names can be up to 15 characters. If you enter
more than 24 digits and 15 characters, you will hear an error tone.

Review directory entries

Press DIRECTORY
1.
directory shows.
-OR-
Press MENU/
to scroll to Directory. Press
p
DIRECTORY
or
q
CALL LOG
2. Press
CALL LOG
appear alphabetically by the first letter in the name.
NOTES:

If the telephone number in the directory exceeds 15 digits, < appears in front of the telephone
number. Press TONE to move towards the end of the telephone number or press # (pound
key) to move towards the beginning of the telephone number.

Directory empty Add contact? appears if there are no directory entries.
or
q
DIRECTORY
when in idle mode. The first entry in the
p
when in idle mode, then press
SELECT
to scroll to Review, press
p
DIRECTORY
or
q
DIRECTORY
to move the
p
MENU
to browse through the directory. Entries
p
0
Enter name
LINDA_
q
CALL LOG
/SELECT, then press
/SELECT.
MENU
Saved
or