Troubleshooting
Action
Step 1
a
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the toner cartridge is not supported, then install a
supported one.
b
Print the document.
Are text or images cut off?
Step 2
a
Remove, and then insert the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
b
Print the document.
Are text or images cut off?
Step 3
a
Remove the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit
to direct light for more than 10 minutes. Extended exposure
to light may cause print quality problems.
Warning—Potential Damage: Do not touch the
photoconductor drum under the imaging unit. Doing so may
affect the quality of future print jobs.
b
Remove any packing material that is stuck on the imaging unit.
Note: Make sure to remove any obstruction between the
charge roller and photoconductor drum.
c
Insert the imaging unit.
d
Print the document.
Are text or images cut off?
Step 4
a
Replace the imaging unit.
b
Print the document.
Are text or images cut off?
Yes
No
Go to step 2.
The problem is
solved.
Go to step 3.
The problem is
solved.
Go to step 4.
The problem is
solved.
Contact
customer
The problem is
support.
solved.
216