Canon Super G3 FAX board-AL1 Service Manual page 51

3) Connect the end of the PTT Cable or Telephone Cord to the modular jack on the host
machine, and connect the other end to the modular jack on the wall.
4) Install the 2 Dust Covers.
6
Installation > After the Installation Installation
F-6-23
F-6-24
6 Installation > After the Installation Installation
5) Return the Left Rear Cover.
6) Connect the power plug to the outlet.
7) Turn ON the main power switch.
CAUTION:
If the machine does not recognize this equipment, unplug and then plug the power plug
or turn OFF the main power switch and then turn it ON within 20 seconds.
To avoid this symptom, unplug the power plug or turn the breaker OFF when installing.
6-9
6-9