Canon Super G3 FAX board-AL1 Service Manual page 48

8) Install the Wire Saddle.
9) Connect the Modular Cable.
• 2 Connectors
• 1 Wire Saddle
NOTE:
The other connector [A] will be used when installing the G3 3rd/4th Line Fax Board.
Fold the cable and secure it with the Wire Saddle. In the case of simultaneous
installation, it is not necessary to secure the cable.
x2
6
Installation > Installation Procedure Installation
F-6-13
[A]
F-6-14
6 Installation > Installation Procedure Installation
10) Disconnect the cable of FAX (1-Line).
• 2 Wire Saddles (Close them after freeing the cable)
x2
11) Connect the cable the connector of FAX (1-Line).
6-6
F-6-15
F-6-16
6-6