4) Install the G3 FAX Control PCB.
• 4 Screws (TP; M3x6)
CAUTION:
Use correct screw holes.
x4
6
Installation > Installation Procedure
Installation
F-6-9
F-6-10
6
Installation > Installation Procedure
Installation
5) Remove the 2 screws. (The removed screws will be used in step 7).)
6) Install the 2 PCB Spacers.
NOTE:
When securing the spacers with removed screws, it is recommended to remove and
then install the screws one by one.
x2
7) Install the Modular Unit.
• 2 Screws (Use the screws removed in step 5).)
x2
6-5
F-6-11
F-6-12
6-5