Advertisement
INSTALLATION INSTRUCTIONS
Fig.20
Fig.21
Step 3. Slide the R1 insulation panel into the side
curtain, the side with pattern should facing the indoor
side.(Fig.22).
Fig.22
Step 4. Repeat on the other side.
Measure the inner width
of the side curtain
or
INSTALL WEATHER STRIPPING (only
11
11
be applicable to Energy star models )
In order to minimize air leaks between the room air
conditoner and the window opening, trim the weather
sttipping with a proper length, peel off the protective
backing and plug any gaps if needed (Fig.23).
9
Fig.23
Advertisement
