Reinstalling The Cargo Cover Panels - Chevrolet 2009 Avalanche Owner's Manual

Reinstalling the Cargo Cover Panels

The strap system can remain attached to the side of the
cargo area while it is not in use, or it can be stored
inside the top box storage compartment. See Top-Box
Storage on page 2-92 for more information.
To reinstall a cargo panel:
1. Starting with cargo panel 1, place the latches in the
unlocked position. Place cargo panel 1 on the cargo
area rails while holding the back of the cargo
panel up.
2-84
Driver Side Shown, Passenger Side Similar
Place the cover on the cargo box within 4 inches of
®
the Midgate and lower the rear of the panel
within 2 to 3 inches from the top of the cargo box.
Push the cover forward making sure that the
guide block engages the retainer bracket opening.
Continue to push forward until the panel is fully
seated against the Midgate. Then lower the rear of
the cover to engage the striker pegs (A) to align
with the striker assembly (B).