Operations; Rotation - Grizzly G0510 Instruction Manual

SECTION 6: OPERATIONS
Keep loose clothing out
of the way of machinery
and keep hair pulled
back during operations.
!
Disconnect power from
the machine when per-
forming
nance,
adjustments. Failure to
do this may result in seri-
ous personal injury.
Always wear a dust mask
when
shaper.
machine produces saw-
dust that may cause
short and long-term res-
piratory illness.
NOTICE
The following section was designed to give
instructions on the basic operations of this
shaper. However, it is in no way comprehen-
sive of every shaper application. WE
STRONGLY RECOMMEND that you read
books, trade magazines, or get formal train-
ing to maximize the potential of your shaper.
G0510 3⁄4 HP Shaper
Wear safety glasses dur-
ing the entire operation
process. Failure to com-
ply may result in serious
personal injury.
any mainte-
assembly
operating
Using
Your shaper is equipped with a FWD/REV (for-
ward and reverse) switch. See Figure 9. In many
instances, it will be necessary to flip the cutter
over and reverse the cutter rotation. Whenever
possible, mount the cutter so the board is milled
on the bottom side (the side away from the oper-
ator). This does a better job and it is safer for the
operator.
Always check the direction of the cutter rota-
tion before any shaping operation.
or
this
this

Rotation

Figure 9. FWD/REV switch.
-15-