Table of Contents
Advertisement
Unpacking
3
The Model G0510
⁄
4
the manufacturer in a carefully packed carton. If
you discover the machine is damaged after you
have signed for delivery, and the truck and driver
are gone, you will need to file a freight claim with
the carrier. Save the container and all packing
materials for possible inspection by the carrier or
its agent. Without the packing materials, filing a
freight claim can be difficult. If you need assis-
tance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
The Model G0510 weighs
approximately 155 lbs.
DO NOT over-exert your-
self while unpacking or
moving your machine—
get assistance or use a
fork lift.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory its
parts.
NOTICE
A full parts list and breakdown can be found
towards the end of this manual. For easier
assembly, or to identify missing parts,
please refer to the detailed illustrations at
the end of the manual.
G0510 3⁄4 HP Shaper
SECTION 5: SET-UP
HP Shaper is shipped from
Piece Inventory
After all the parts have been removed from the
carton, you should have:
• Shaper Unit
• Miter Gauge
• Fence Boards
• Safety Guard
• Stand (4pcs)
• Adjustable Fence (3pcs)
• Hardware
–Rubber Feet ..........................................4
–Hex Bolt M6-1.0 x 12 ............................4
–Hex Nut M6-1.0......................................4
–Flat Washer
3
–Carriage Bolt M8-1.25 x 20..................16
–Hex Nut M8-1.25..................................20
–Slot Head Screws ..................................4
5
–Flat Washer
In the event that any non-proprietary parts are
missing (e.g. a nut or a washer), we would be glad
to replace them, or for the sake of expediency,
replacements can be obtained at your local hard-
ware store.
⁄
" ....................................20
8
⁄
" ....................................4
16
-9-
Advertisement
Table of Contents
