Taillamps - Chevrolet 2007 Express 2007 Express Owner's Manual

To replace a bulb, do the following:
1. Remove the two screws from the CHMSL
assembly.
2. Remove the assembly.
3. Turn the bulb counterclockwise one quarter
turn to remove it from the socket.
4. Install a new bulb.
5. Reverse the steps to reinstall the assembly.
If items are loaded on the roof of the vehicle,
as in a luggage carrier, care should be taken not
to block or damage the center high-mounted
stoplamp unit.

Taillamps

To replace one of these bulbs, do the following:
2. Pull the taillamp assembly rearward to clear
the studs.
3. Slide the taillamp assembly slightly upward
to release the lower clip.
4. Remove the three nuts on the taillamp
assembly.
5. Remove the taillamp assembly from the
vehicle.
1. Remove the
two inboard nuts
from the inside
of the taillamp
assembly.
339